BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Center For Manufacturing Technology - ECPv6.15.17//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Center For Manufacturing Technology
X-ORIGINAL-URL:https://www.customtrainingcenter.com
X-WR-CALDESC:Events for Center For Manufacturing Technology
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20220101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20250102T180000
DTEND;TZID=UTC:20250102T223000
DTSTAMP:20260415T051221
CREATED:20240507T164946Z
LAST-MODIFIED:20241220T144255Z
UID:10000089-1735840800-1735857000@www.customtrainingcenter.com
SUMMARY:Mastercam
DESCRIPTION:Start Date: 01/02/2025\nEnd Date: 01/07/2025\n01/02  6pm to 10:30pm\n01/03  6pm to 10:30pm\n01/04  8am to 12pm\n01/06  6pm to 10:30pm\n01/07  6pm to 10:30pm \nPrograms offered: \n\nC022A MasterCam Basic\nC021A MasterCam/Setup Advanced\n\nThe following classes are essential for an all-around knowledge for everyday machine shop practices. \n1- Introduction & Drawing \n\nIntro to newest version of MasterCam\nImproving general overall drawing knowledge using “Wireframe”\nImproving general overall drawing knowledge using “Solids”\nIntro to Clean workspace Programming\n\n2- Toolpaths & Posting \n\nMake a complete program on one page using one 3D Model with “Wireframe”\nMake an advanced program on one page using one 3D Model with “Wireframe”\nCreate a Program using only 3D Model “Solids Machining”\n\n \n  \n  \n\n\nMastercam\n  \n  \n  \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/mastercam-6/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Mastercam.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240812T080000
DTEND;TZID=UTC:20240812T153000
DTSTAMP:20260415T051221
CREATED:20240507T164652Z
LAST-MODIFIED:20240509T190934Z
UID:10000087-1723449600-1723476600@www.customtrainingcenter.com
SUMMARY:Mastercam
DESCRIPTION:Start Date:  8/12/2024 \nEnd Date:  8/14/2024 \nMon – Tues  8am to 3:30pm \nWed  8am to 2:30pm \nPrograms offered: \n\nC022A MasterCam Basic\nC021A MasterCam/Setup Advanced\n\nThe following classes are essential for an all-around knowledge for everyday machine shop practices. \n1- Introduction & Drawing \n\nIntro to newest version of MasterCam\nImproving general overall drawing knowledge using “Wireframe”\nImproving general overall drawing knowledge using “Solids”\nIntro to Clean workspace Programming\n\n2- Toolpaths & Posting \n\nMake a complete program on one page using one 3D Model with “Wireframe”\nMake an advanced program on one page using one 3D Model with “Wireframe”\nCreate a Program using only 3D Model “Solids Machining”\n\n \n  \n  \n\n\nMastercam\n  \n  \n  \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/mastercam-4/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Mastercam.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240805T143000
DTEND;TZID=UTC:20240805T170000
DTSTAMP:20260415T051221
CREATED:20240507T172310Z
LAST-MODIFIED:20240509T190631Z
UID:10000093-1722868200-1722877200@www.customtrainingcenter.com
SUMMARY:CNC Milling Set-Up
DESCRIPTION:Start Date: 8/5/2024 \nEnd Date:  8/30/2024 \nMon – Fri  2:30pm to 5:00pm \nPrograms offered: \n\nC031 CNC Advanced Milling Set-up\n\nThe following classes are essential for an all-around knowledge of CNC Setup/Operation \n1- Machine Startup & Initial Setup \n\nTurning on machine and warming up properly\nHandle Jog use\nTool Changing\nExplanation of Tool Types & Applications\nTurning off machine safely\n\n2- Setup \n\nTool Offsets\nWork Offsets\nTramming Tools and Checking Runout\nVise\, Angle Plate\, & Fixture Plate Setup\nCutting Step Jaws\n\n3- Hands-on/ Setup & Operate Programs \n\nSetup & Run Programs\nRead Setup Sheets\nCollect Tooling\nMaking Diameter and Height “Wear” adjustments\nProve out Operations\nRepeat for subsequent Ops\nSetup & Run Mill-144 Test\n\n\nCNC Milling Set-Up\n\n \n  \n  \n\n\n \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/cnc-milling-set-up-2/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/CNC-Milling-Setup.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240801T080000
DTEND;TZID=UTC:20240801T140000
DTSTAMP:20260415T051221
CREATED:20240507T182852Z
LAST-MODIFIED:20240627T171942Z
UID:10000098-1722499200-1722520800@www.customtrainingcenter.com
SUMMARY:GD&T
DESCRIPTION:Start Date:  8/1/2024 \nEnd Date:  8/6/2024 \nTues – Wed  8am to 2:00pm \nThur  12pm to 2pm \nPrograms offered: \n\nC032 GD & T\n\nParticipants will learn the importance of the GD&T system\, proper identification and call out of datum features\, and the effect of modifiers such as MMC and LMC. Attendees will also learn how GD&T saves money over traditional tolerances and how to interpret and apply each of the 14 symbols. \nUnit 1:  Introduction to symbols and Terms \nUnit 2: Limits of Size \nUnit 3: How the Geometric System Works \nUnit 4: Position Verification \nUnit 5: Product Plans and Virtual Condition \nUnit 6: The Datum Reference Frame \nUnit 7: Datum Feature Modifiers \nUnit8: The Datum Reference Frame II: Targets and Irregular Surfaces \nUnit 9: The Datum Reference Frame III: Advanced Concepts \nUnit 10: Form Tolerances \nUnit 11: Orientation Tolerances \nUnit 12: Profile Tolerances \nUnit 13: Position Tolerances \nUnit 14: Coaxial Tolerances \nUnit 15: Fastener Formulas and Screw Threads \nUnit16: Boundaries \nUnit 17: Application Exercises \n \n\n\n \n  \n  \n  \n  \n  \n\n\n 
URL:https://www.customtrainingcenter.com/calendar/gdt-2/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
CATEGORIES:In-Person
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/GDT.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240729T080000
DTEND;TZID=UTC:20240729T140000
DTSTAMP:20260415T051221
CREATED:20240507T182151Z
LAST-MODIFIED:20240627T171701Z
UID:10000096-1722240000-1722261600@www.customtrainingcenter.com
SUMMARY:Print Reading
DESCRIPTION:Start Date: 7/29/2024 \nEnd Date: 8/1/2024 \nMon – Wed 8am to 2:00pm \nThur  8am to 12pm \nPrograms offered: \n\nC018 Blueprint Reading\nBlueprint Reading & MasterCam 2D\n\nBasic Blueprint Reading & Sketching for Machinist is a 5-lesson course designed to instruct students how to read an engineering Blueprint. SolidWorks (CAD) software will be used to both illustrate and reinforce the student’s blueprint reading skills. \nLesson 1: Students will learn how to identify different line types and how to read One\, Two and Three view drawings. In addition\, students will learn the Solidworks user interface and the basic functionality of SolidWorks. \nLesson 2: Tolerances and Dimensioning are the main focus of this lesson. Students will be taught different styles of Tolerances and Dimensions and how they are used. \nLesson 3: Introduction to Section Views and part features such as countersink\, counterbore\, groove and slots. \nLesson 4: In this lesson we’ll be discussing fasteners\, screw threads with an introduction to assemblies. We’ll discuss the different types of threads and their designations \nLesson 5: Students will be introduced to Basic GD & T (Geometric Dimensioning and Tolerancing). In addition\, we’ll show the students how to create dimensions in SolidWorks. \n \n\n\n \n\n\n 
URL:https://www.customtrainingcenter.com/calendar/print-reading/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
CATEGORIES:In-Person
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Print-Reading-2.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240715T080000
DTEND;TZID=UTC:20240715T153000
DTSTAMP:20260415T051221
CREATED:20240507T164523Z
LAST-MODIFIED:20240509T185847Z
UID:10000086-1721030400-1721057400@www.customtrainingcenter.com
SUMMARY:Mastercam
DESCRIPTION:Start Date:  7/15/2024 \nEnd Date:  7/17/2024 \nMon – Tues  8am to 3:30pm \nWed  8am to 2:30pm \nPrograms offered: \n\nC022A MasterCam Basic\nC021A MasterCam/Setup Advanced\n\nThe following classes are essential for an all-around knowledge for everyday machine shop practices. \n1- Introduction & Drawing \n\nIntro to newest version of MasterCam\nImproving general overall drawing knowledge using “Wireframe”\nImproving general overall drawing knowledge using “Solids”\nIntro to Clean workspace Programming\n\n2- Toolpaths & Posting \n\nMake a complete program on one page using one 3D Model with “Wireframe”\nMake an advanced program on one page using one 3D Model with “Wireframe”\nCreate a Program using only 3D Model “Solids Machining”\n\n \n  \n  \n\n\nMastercam\n  \n  \n  \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/mastercam-3/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Mastercam.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240708T080000
DTEND;TZID=UTC:20240708T140000
DTSTAMP:20260415T051221
CREATED:20240507T192547Z
LAST-MODIFIED:20240509T183953Z
UID:10000100-1720425600-1720447200@www.customtrainingcenter.com
SUMMARY:Apprentice Inspection
DESCRIPTION:Start Date: 7/8/2024  End Date: 8/9/2024 \nMon – Fri 8am to 2pm \nPrograms offered: \n·         Introduction to Inspection Practices \n·         C029 Apprentice Inspection \nInspection is an entry level certificate program for students who want to learn how to measure machined parts using a Micrometer\, Vernier Caliper\, CMM (Coordinate Measuring Machine) and much more. \nInspection & Measurement:         \n·         Perform measuring and inspection \n·         Measure workpiece with Micrometers \n·         Measure workpiece with Depth Micrometer \n·         Measure workpiece with Vernier Calipers \n·         Measure workpiece with Gage Pins \n·         Measure workpiece with Radius Gage \n·         Check Concentricity\, Run-out\, and Flatness \nReading Blueprints & Sketches:        \n·         Read and interpret basic blueprints \n·         Introduction to GD&T \nCoordinate Measurement Machine (CMM):        \n·         Intro to CMM (Manual Operation) \n·         Intro to PC-DMIS Programming \nIntroduction to GD&T \n \n  \n  \n\n\n \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/apprentice-inspection-2/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Inspection.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240610T080000
DTEND;TZID=UTC:20240610T153000
DTSTAMP:20260415T051221
CREATED:20240507T164414Z
LAST-MODIFIED:20240509T183028Z
UID:10000085-1718006400-1718033400@www.customtrainingcenter.com
SUMMARY:Mastercam
DESCRIPTION:Start Date: 6/10/2024  End Date: 6/12/2024 \nMon – Tues 8am to 3:30pm \nWed  8am to 2:30pm \nPrograms offered: \n\nC022A MasterCam Basic\nC021A MasterCam/Setup Advanced\n\nThe following classes are essential for an all-around knowledge for everyday machine shop practices. \n1- Introduction & Drawing \n\nIntro to newest version of MasterCam\nImproving general overall drawing knowledge using “Wireframe”\nImproving general overall drawing knowledge using “Solids”\nIntro to Clean workspace Programming\n\n2- Toolpaths & Posting \n\nMake a complete program on one page using one 3D Model with “Wireframe”\nMake an advanced program on one page using one 3D Model with “Wireframe”\nCreate a Program using only 3D Model “Solids Machining”\n\n \n  \n  \n\n\nMastercam\n  \n  \n  \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/mastercam-2/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Mastercam.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240530T120000
DTEND;TZID=UTC:20240530T140000
DTSTAMP:20260415T051221
CREATED:20240507T182640Z
LAST-MODIFIED:20240509T171355Z
UID:10000095-1717070400-1717077600@www.customtrainingcenter.com
SUMMARY:GD&T
DESCRIPTION:Start Date: 5/30/2024  End Date: 6/4/2024 \nTues – Wed 8am to 2pm \nThur  12pm to 2pm \nPrograms offered: \n\nC032 GD & T\n\nParticipants will learn the importance of the GD&T system\, proper identification and call out of datum features\, and the effect of modifiers such as MMC and LMC. Attendees will also learn how GD&T saves money over traditional tolerances and how to interpret and apply each of the 14 symbols. \nUnit 1:  Introduction to symbols and Terms \nUnit 2: Limits of Size \nUnit 3: How the Geometric System Works \nUnit 4: Position Verification \nUnit 5: Product Plans and Virtual Condition \nUnit 6: The Datum Reference Frame \nUnit 7: Datum Feature Modifiers \nUnit8: The Datum Reference Frame II: Targets and Irregular Surfaces \nUnit 9: The Datum Reference Frame III: Advanced Concepts \nUnit 10: Form Tolerances \nUnit 11: Orientation Tolerances \nUnit 12: Profile Tolerances \nUnit 13: Position Tolerances \nUnit 14: Coaxial Tolerances \nUnit 15: Fastener Formulas and Screw Threads \nUnit16: Boundaries \nUnit 17: Application Exercises \n \n\n\n \n  \n  \n  \n  \n  \n\n\n 
URL:https://www.customtrainingcenter.com/calendar/gdt/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
CATEGORIES:In-Person
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/GDT.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240527T080000
DTEND;TZID=UTC:20240527T140000
DTSTAMP:20260415T051221
CREATED:20210903T161751Z
LAST-MODIFIED:20240509T181422Z
UID:10000001-1716796800-1716818400@www.customtrainingcenter.com
SUMMARY:Print Reading
DESCRIPTION:Start Date: 5/27/2024  End Date: 5/30/2024 \nMon – Wed 8am to 2pm \nThur  8am to 12pm \nPrograms offered: \n\nC018 Blueprint Reading\nBlueprint Reading & MasterCam 2D\n\nBasic Blueprint Reading & Sketching for Machinist is a 5-lesson course designed to instruct students how to read an engineering Blueprint. SolidWorks (CAD) software will be used to both illustrate and reinforce the student’s blueprint reading skills. \nLesson 1: Students will learn how to identify different line types and how to read One\, Two and Three view drawings. In addition\, students will learn the Solidworks user interface and the basic functionality of SolidWorks. \nLesson 2: Tolerances and Dimensioning are the main focus of this lesson. Students will be taught different styles of Tolerances and Dimensions and how they are used. \nLesson 3: Introduction to Section Views and part features such as countersink\, counterbore\, groove and slots. \nLesson 4: In this lesson we’ll be discussing fasteners\, screw threads with an introduction to assemblies. We’ll discuss the different types of threads and their designations \nLesson 5: Students will be introduced to Basic GD & T (Geometric Dimensioning and Tolerancing). In addition\, we’ll show the students how to create dimensions in SolidWorks. \n \n\n\n \n\n\n 
URL:https://www.customtrainingcenter.com/calendar/printreading/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
CATEGORIES:In-Person
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Print-Reading-2.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240520T160000
DTEND;TZID=UTC:20240520T210000
DTSTAMP:20260415T051221
CREATED:20240507T170657Z
LAST-MODIFIED:20240509T181309Z
UID:10000092-1716220800-1716238800@www.customtrainingcenter.com
SUMMARY:CNC Milling Set-Up
DESCRIPTION:Start Date: 5/20/2024  End Date: 6/12/2024 \nMon – Wed 4pm to 9pm \nPrograms offered: \n\nC031 CNC Advanced Milling Set-up\n\nThe following classes are essential for an all-around knowledge of CNC Setup/Operation \n1- Machine Startup & Initial Setup \n\nTurning on machine and warming up properly\nHandle Jog use\nTool Changing\nExplanation of Tool Types & Applications\nTurning off machine safely\n\n2- Setup \n\nTool Offsets\nWork Offsets\nTramming Tools and Checking Runout\nVise\, Angle Plate\, & Fixture Plate Setup\nCutting Step Jaws\n\n3- Hands-on/ Setup & Operate Programs \n\nSetup & Run Programs\nRead Setup Sheets\nCollect Tooling\nMaking Diameter and Height “Wear” adjustments\nProve out Operations\nRepeat for subsequent Ops\nSetup & Run Mill-144 Test\n\n\nCNC Milling Set-Up\n\n \n  \n  \n\n\n \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/cnc_milling_set-up/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/CNC-Milling-Setup.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240513T080000
DTEND;TZID=UTC:20240513T153000
DTSTAMP:20260415T051221
CREATED:20240506T213356Z
LAST-MODIFIED:20240509T184508Z
UID:10000084-1715587200-1715614200@www.customtrainingcenter.com
SUMMARY:Mastercam
DESCRIPTION:Start Date: 5/13/2024  End Date: 5/15/2024 \nMon – Tues 8am to 3:30pm \nWed 8am to 2:30pm \nPrograms offered: \n\nC022A MasterCam Basic\nC021A MasterCam/Setup Advanced\n\nThe following classes are essential for an all-around knowledge for everyday machine shop practices. \n1- Introduction & Drawing \n\nIntro to newest version of MasterCam\nImproving general overall drawing knowledge using “Wireframe”\nImproving general overall drawing knowledge using “Solids”\nIntro to Clean workspace Programming\n\n2- Toolpaths & Posting \n\nMake a complete program on one page using one 3D Model with “Wireframe”\nMake an advanced program on one page using one 3D Model with “Wireframe”\nCreate a Program using only 3D Model “Solids Machining”\n\n \n  \n  \n\n\nMastercam\n  \n  \n  \n  \n  \n  \n  \n  \n 
URL:https://www.customtrainingcenter.com/calendar/mastercam/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ATTACH;FMTTYPE=image/png:https://www.customtrainingcenter.com/dev/wp-content/uploads/2024/04/Mastercam.png
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231218T080000
DTEND;TZID=UTC:20231221T130000
DTSTAMP:20260415T051221
CREATED:20231127T203655Z
LAST-MODIFIED:20231127T203655Z
UID:10000002-1702886400-1703163600@www.customtrainingcenter.com
SUMMARY:CNC Milling Set Up
DESCRIPTION:Here is the CNC Milling Set Up description.
URL:https://www.customtrainingcenter.com/calendar/cnc-milling-set-up/
LOCATION:Center for Manufacturing Technology\, 30 Nashua Street\, Woburn\, 01801\, United States
ORGANIZER;CN="Joanna Dowling":MAILTO:jdowling@customgroupusa.com
END:VEVENT
END:VCALENDAR